• Murphy

PowerView® 101

PowerView 101 offers a simple connection to optional components and displays over 50 standard SAE J1939 parameters

The PowerView PV101 display is a multifunction tool that enables equipment operators to view standard engine and transmission parameters and active/stored trouble codes. The display can show a single or a four-parameter simultaneous display with text descriptions for most common fault conditions. The enhanced alarm indicators have ultra-bright alarm and shut-down LEDs

  • Tier 4 / Euro Stage IV Ready
Specifications Downloads
X
Specifications Drawer: 

Operating Voltage: 8 - 32 VDC

Reversed Polarity: Withstands reversed battery terminal polarity indefinitely within operating temperatures

Environmental

  • Operating Temperature: -40° to +185° F (-40°  to +85° C)
  • Display Viewing Temperature: -20° to +185° F (-29°  to +85° C)
  • Storage Temperature: -40° to +185° F (-40° to +85° C)
  • Environmental Sealing: IP68, ± 5 PSI (± 34kPa)

Power Supply Operating Current

  • (@ 14VDC) 52 mA min.: 300 mA max
  • (@ 32VDC) 1A max (with LCD heater)

CAN Bus: SAE J1939 compliant

Case: Polycarbonate/polyester

Maximum Panel Thickness: 3/8 inch (9.6 mm)

Auxiliary RS485 Communications Port

  • User configurable as MODBUS MASTER or MODBUS RTU SLAVE
  • MASTER ACTIVE (default) drives optional PVA or PVM gages
  • SLAVE ACTIVE offers user adjustable communication parameters

Resistive Input: user selectable as one of the following

  • Backlighting Potentiometer: 1 K Ohm, 1/4 W
  • Murphy Fuel Sender: 33 Ohm full, 240 Ohm empty set standard from factory for use with Murphy fuel sender. Programmable for use with non-Murphy fuel senders.

Shipping Weights (all models): 1 Lb. (450 g.)

Shipping Dimensions (all models)5 x 6 x 6 in. (127 x 152 x 152 mm)

Clamp: PBT

Connectors: 6-pin Deutsch DT Series