V2.9 for colour displays - simulation values

TonyFrazier
Posts: 6
Joined: Mon Jan 09, 2017 11:21 am

V2.9 for colour displays - simulation values

Post by TonyFrazier » Tue Dec 05, 2017 3:35 am

Hi

V2.9 21073 for colour displays, PV780, Windows10

If you have a variable linked to an image visible condition and change the simulation value to "1" to display the image in the tools section nothing happens. If you change it back to zero and then change it back to 1 again the image then appears. After that it works OK. It gets a bit tedious when there is a lot of testing to do.

Also is it possible to get the simulation slider back that we had in earlier versions please? Testing would be much quicker and easier especially if you have multiple values.

Is the automatic backup coming back at some point?

Thanks & regards Tony
boyce
Enovation Controls Development
Enovation Controls Development
Posts: 322
Joined: Wed Sep 08, 2010 5:09 pm

Re: V2.9 for colour displays - simulation values

Post by boyce » Tue Dec 05, 2017 4:53 pm

It seems to work as expected for me. How are you configuring the visibility condition?
visiblecondition.JPG
visiblecondition.JPG (148.15 KiB) Viewed 137 times
I told the Director of Software that you would like the slider back.
Boyce Schrack
Enovation Controls
TonyFrazier
Posts: 6
Joined: Mon Jan 09, 2017 11:21 am

Re: V2.9 for colour displays - simulation values

Post by TonyFrazier » Wed Dec 06, 2017 1:28 am

I did some more testing today after opening up the config I just sent you and a lot worked first time but quite a few didn't. It's very inconsistent.
On the main page open up the tools and go to the bottom of the list of variables. Change the simulation value to 1 for EmergStopLamp - a warning appears. Go up one and change CableTensionWarningRed to 1 - nothing happens. Change it back to 0 - nothing happens - change it back to 1 and a warning appears. If you close and reopen the config it works the other way round too - the second variable you change usually won't appear and after that it's anyone's guess.

Hope that helps, regards Tony
boyce
Enovation Controls Development
Enovation Controls Development
Posts: 322
Joined: Wed Sep 08, 2010 5:09 pm

Re: V2.9 for colour displays - simulation values

Post by boyce » Wed Dec 06, 2017 3:57 pm

Can you Private Message the .murphyConfig for it to me? Thank you.
Boyce Schrack
Enovation Controls
boyce
Enovation Controls Development
Enovation Controls Development
Posts: 322
Joined: Wed Sep 08, 2010 5:09 pm

Re: V2.9 for colour displays - simulation values

Post by boyce » Fri Dec 08, 2017 1:48 pm

Thanks for sending in the configuration. I confirmed the problem as you described and I will submit a bug for the developers. Sorry for your inconvenience.
Boyce Schrack
Enovation Controls
TonyFrazier
Posts: 6
Joined: Mon Jan 09, 2017 11:21 am

Re: V2.9 for colour displays - simulation values

Post by TonyFrazier » Wed Dec 13, 2017 1:59 am

No problem, thanks very much Boyce