I/O Summary

• Inputs (21):
  • Universal Analog / High Frequency: 8
  • Universal Analog: 13
• Outputs (22) [Software Selectable]:
  • 4A PWM (feedback): 6
  • Dual Range PWM 4A / 0.5 A (feedback): 8
  • 15A PWM (feedback): 8

Hardware

• CAN 2.0B / J1939: 3 Channels
• Sensor Supply: (2) 400mA max @ 5 or 10 VDC [Software Selectable Voltage]
• Connectors:
  • J1A (4 pin) – DTP06-4S
  • J1B (6 pin) – DT06-6S-E008
  • J2 (18 pin – A key) – DT16-18SA-K004
  • J3 (18 pin – B key) – DT16-18SB-K004
  • J4 (18 pin – D key) – DT16-18SD-K004
• LED Indicators:
  • (1) Green – Power Status
  • (1) White – Software Configurable
  • (1) Blue – Software Configurable
  • (8) High Current Output Status
    • Output Inactive: Indicator is Dark
    • Output Active: Solid Green
    • Output in Fault: Blinking Green with code indicating fault

Power Supply

• Nominal Supply Voltage: 6-32 VDC, Nominal Operation @ 12 /24 VDC
• Peak Voltage During Load Dump: Power supply suppression limits voltage to 55 Volts for duration of Load Dump Event (2 ohm supply)
• Maximum Current: 100 A
• Idle Current 12/24 VDC:
  • < 200mA @ 12VDC
  • < 100mA @ 24VDC
• Standby Current 12/24 VDC:
  • < 5mA @12VDC
  • < 2.5mA @ 24VDC
• Node/Sleep Pin: Control sleep and wake settings

Physical & Environmental

• Operating Temperature Range: -40 °C to +105 °C (May be limited to +85°C at full rated current)
• Storage Temperature Range: -40 °C to +125 °C
• Operating Altitude: 0-4000 m
• IP Rating: IP67 (IP69K with harness-side rated boots)
• Vibration: 5.82 Grms, 8 hours per axis
• Shock: ±50G, 6ms
• Housing: Cast aluminum housing, soft-gel potted for extreme ruggedness and durability
• EMC: 2014/30/EU (CE / E-MARK), CISPR 11, CISPR 25, EN 60945, EN 61000-4-2, EN 61326-1, SAE J1113-2, SAE J1113-4, SAE J1113-11, SAE J1113-12, SAE J1113-13, SAE J1113-21, SAE J1113-22, SAE J1113-26, SAE J1455
• Dimensions: 250 mm x 140 mm x 60 mm (refer to Figure 2.1)
• Weight: Less than 5 pounds