• Murphy
NEW

MGC1000

The MurphyLink Series MGC1000 Panel, engineered and built by Enovation Controls’ Industrial Panel Division, is a superior panel offering for generator control with the powerful, yet simple-to-configure MPC-10 controller.

The MPC-10 is a general, all-purpose manual/auto start engine controller. The controller is purposed primarily for applications where a wide array of inputs and outputs are not required. The MPC-10 supports J1939 CAN protocols for electronically governed engines as well as analog sensors on mechanical engines for fault and safety shutdowns.

The Control Panel utilizes industry-standard Deutsch connector and is compatible for use on the simplest mechanical engine to the most advanced, fully electronic Tier 4 engines, when used with the correct Murphy Industrial Harness1 (MIH) or John Deere OEM engine harnessing. The MGC1000 panel can be mounted directly to the engine or engine/application cover.

Specifications Downloads How to Order
X
Specifications Drawer: 
  • MPC-10 Controller
    • Operating Voltage: 8-32 VDC, reverse polarity and load dump protected
    • Operating Temperature: -40° to +85° C (-40° to 185° F)
    • Storage Temperature: -40° to +85° C (-40° to 185° F)
  • Total Current Consumption:
    • Power on in stopped state; 117 mA at 12 VDC.
    • Power on in standby mode; 52 mA at 12 VDC.
  • Enclosure: Sheet Metal
  • Mating Connector: 21 Position, Deutsch HDP26-24-21SE
  • Communications:
    • (1) CAN J1939
    • (1) RS485, Modbus RTU
    • (1) USB 2.0B for Programming
  • Outputs (8):
    • (2) Relays: 10A, Dedicated B+ (30 VDC @ 10A max.), 30A maxaggregate @ 85C
    • (2) Low-side (1A)
    • (2) High-side (1A)
    • (1) Dedicated Alternator Excite (provides Charge Fail Fault if unable to excite alternator)
  • Inputs (9):
    • (2) Digital, configurable (high/low)
    • (2) Analog, configurable (4-20 mA, 0-5V, resistive)
    • (1) Frequency, supporting Magnetic pickup (30 Hz - 10 kHz, 2.0 VAC-120 VAC) and Engine Alternator (30 Hz - 10 kHz, 4.5 VRMS - 90 VRMS)
  • Dimensions: 4.16 x 6.083 x 10.68 in. (360 x 155 x 271mm) (WxHxD)

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.

Literature Drawer: 

Additional product documentation can be found on our product support website or by clicking the Help Center button above.

Primary Method - Table: 
Part NumberModel/Description
75700649MGC1000 120 VAC Genset Panel
75700650MGC1000 240/480 VAC Genset Panel
75001313Engine (mechanical) Harness, 21 Position Connector 10’ Whip Harness (3m approx.)
40000657I/O Harness 12 Position Connector 5’ MPC10
40000658E Stop PB Kit
78000668USB Programming Harness