Search glass

    OpenViewTM S50

    Posted on: January 2nd, 2024 by Barn3s

    Extensive capabilities in a compact package

    Like its cousin, the PowerView 500, the OpenView™ S50 is a full-color configurable display that integrates vital engine, transmission and diagnostic information into an easy-to-read operator interface. The OpenView™ S50 is easily viewed in full sunlight and contains an optically bonded LCD inside its IP65-rated case to keep it safe in most weather environments. The OpenView™ S50 comes standard with a glass-front, glove-friendly touchscreen suited to a wide array of applications.

    The OpenView™ S50 anchors the all-new Select Series, retaining the ruggedness, customizability, and excellent performance Enovation Controls’ displays are known for, but with an unprecedented value proposition posed to expand full-color rugged displays to new markets.

    OV-S50 is programmable with your selected toolset through the power of the new OpenPV® Software Platform. Graphic interface not included, custom programming required.

    DRC Series

    Posted on: December 22nd, 2023 by josephwill

    The DRC Series offers versatility and ease of use in a narrow DIN-rail mounted housing.

    The DRC is an electronic control module for use with proportional solenoid valves in open loop systems. The module will provide current to the solenoids of the valve in response to various types of signals provided by the control system. Indicators on the front of the module provide an overview of the operating status. System configuration is accomplished through a convenient remote terminal. All settings are stored in permanent memory within the unit. The unit is housed in an attractive, compact enclosure

    PowerView® U150

    Posted on: December 15th, 2023 by josephwill

    The Largest Display in the PowerView® Line-Up Brings Ultimate Performance to Rugged Applications

    The PowerView® U150 flagship display leads the way for the introduction of the Ultimate Series. A premium-color programmable display capable of integrating vital machine, transmission and diagnostic information into an easy-to-read operator interface.

    This large 15-inch display features an expansive 16GB of storage and a high-speed processor that boots quickly and can render high-quality graphics and animations. Designed specifically to build off of the tried-and-true PV1200.

    PVU150 is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required

    PowerView® U120

    Posted on: December 15th, 2023 by josephwill

    The Enovation Controls PowerView® U120 Huge, Full-Color Display brings the Ultimate User Experience to Rugged Applications

    The PowerView® U120 defines the all-new Ultimate Series as a premium-color programmable display capable of integrating vital machine, transmission and diagnostic information into an easy-to-read operator interface.

    This large 12-inch display features an expansive 16GB of storage and a high-speed processor that boots quickly and can render high-quality graphics and animations. Designed specifically to build off of the tried-and-true PV1100.

    PVU120 is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required.

    ML2000 Panels

    Posted on: December 14th, 2023 by josephwill

    Murphy’s ML2000 control panel series incorporates all the power and functionality of the PowerCore® MPC-20 Controller in a panel solution for most any engine-driven application.

    The ML2000 panel series features polycarbonate, metal enclosure or flat panel options and standard harnessing for most major engine manufacturer ECUs. It is built to withstand harsh environments and features an out-of-the-box, fully sealed, powerful all-purpose industrial controller. ML2000 is Tier 4 / Stage IV ready and is easily viewable in full-sun conditions with a large 3.8-inch easy-to-read, monochrome transflective LCD. It is engineered for incredibly easy initial setup and is configurable by the user to meet the most versatile applications, allowing for quick uptime and less headaches on the manufacturing floor or in the field.

    PowerView® P70

    Posted on: December 14th, 2023 by josephwill

    The PowerView® P70 is next generation of premium rugged display controllers.

    The PowerView® P70 is a full-color 7-inch configurable display that combines the modern glass-front form factor of a PowerView® 700 with a similar I/O of the PowerView® 485.

    The P70 will be offered in two variants:

    PVP70 is programmable exclusively with PowerVision Configuration Studio® (See How to Order tab for details). Graphic interface not included, custom programming required.

    IX3212 Intelligent Xpansion™ Power Distribution Module

    Posted on: December 14th, 2023 by josephwill

    The IX3212 Intelligent Xpansion™ power distribution module (PDM) expands CAN bus control networks by replacing existing relay and fuse boxes with more reliable solid-state switches that can directly drive work lights, wiper motors, cooling fans, directional DC motors and other high current loads.

    Each of the 12 PDM outputs can switch or proportionally control up to 15 A loads in 2.5 A increments and feature over-current detection and shut-down capability. Outputs are paired to run up to six electric motors with H-bridge direction control. Twelve digital inputs monitor switched battery, ground and floating inputs. Additionally, six 0-5V analog inputs and two resistive inputs are available with a 5V sensor supply. For applications not requiring a CAN bus control, the inputs can directly trigger outputs without the need for a dedicated controller.

    PowerView® 1200

    Posted on: December 3rd, 2023 by Barn3s

    The PowerView® 1200 packs power and viewability in an ultra-wide display.

    The PowerView® 1200 is a full-color programmable display capable of integrating vital machine, transmission and diagnostic information into an easy-to-read operator interface. This large 12.3-inch wide format, full-color display with optional touchscreen features an expansive 8GB of storage and a high-speed processor that boots quickly and can render high-quality graphics and animations. The display’s bonded LCD can easily be viewed, even in full sunlight, and its available glove-friendly touchscreen and rugged design make it a perfect solution for all types of environments and applications. The PV1200 is available in touchscreen and non-touchscreen models.

    PV1200 is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required.

    PowerView® 1100

    Posted on: December 2nd, 2023 by Barn3s

    The PowerView® 1100 display streamlines size and speed in a single display.

    The PowerView® 1100 is a full-color configurable display that integrates vital engine, transmission and diagnostic information into an easy-to-read operator interface. This large 10.6-inch display features an expansive 8GB of storage and a high-speed processor that boots quickly and can render high-quality graphics and animations. The display’s bonded LCD can easily be viewed, even in full sunlight, and its glove-friendly touchscreen and rugged design make it a perfect solution for all types of environments and applications. The PV1100 is available in portrait or landscape models.

    PV1100 is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required.

    uControl™ MC4‑26-20

    Posted on: May 5th, 2023 by Barn3s

    The uControl™ MC4-26-20 mobile machine controller brings powerful hydraulic control and extensive flexible I/O to rugged applications.

    With the most I/O of any controller in the uControl™ series, the MC4-26-20 is ready for high-performance fluid power control and 26 total inputs and 20 total outputs. Built to perform in high heat and high vibration areas, uControl™ mobile controllers deliver extreme durability with precision control. Featuring multiple CAN interfaces, open/short circuit protection, flexible universal inputs and software selectable outputs, uControl™ mobile controllers are ready and scalable for a variety of equipment needs and applications.

    PowerView® 780B

    Posted on: January 30th, 2023 by Barn3s

    PowerView® 780B display provides power and reliability with an easy-to-read interface.

    The PowerView® 780B is a full-color configurable display that integrates vital engine, transmission and diagnostic information into an easy-to-read operator interface. The PV780B also offers all the features of the popular PV780 with more power and memory. This sleek 7-inch display features an expansive 8 GB of storage and a high-speed processor to boot quickly as well as seamlessly showcase high-quality graphics and animations. The display’s bonded LCD can easily be viewed, even in full sunlight, and its available glove-friendly touchscreen and rugged design make it a perfect solution for all types of environments and applications. The PV780B is available in touchscreen and non-touchscreen models.

    PV780B is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required.

    PowerView® 780

    Posted on: January 29th, 2023 by Barn3s

    PowerView® 780 display offers customization and all-weather durability.

    The PowerView® 780 display is a full-featured, configurable display that shows integrated engine, transmission and diagnostic information in an easy-to-read operator interface. Equipment functionality can be further integrated through the available I/O and controlled via the CAN bus. The PV780 features a full-color, 7-inch bonded LCD for brighter, smoother graphics and best-in-class sunlight readability. The rugged design makes this display a great solution for extreme environments.

    PV780 is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required.

    Linkedin Youtube Facebook-f Instagram
    © 2025 Enovation Controls, LLC.