S35 – Coming Soon

Posted on: June 11th, 2024 by tmcdaniel

CANBridge

Posted on: May 30th, 2024 by tmcdaniel

The Enovation Controls CANBridge is a compact module designed to enable the exchange of CAN communication data between two CAN networks. This can facilitate data exchange between networks operating at different baud rates. A software configuration tool simplifies setup and allows users to save configuration settings in a file for future use.

CANBridge can limit data exchange in one direction only, or filter bidirectionally on 11 or 29-bit identifiers. Additionally, the unit allows for using SAE J1939/NMEA2000 rules. J1939 data can be filtered independently on the source address and PGN in both directions. This filtering supports up to 16 combinations of source address and PGN. NMEA2000 has the same options for filtering as J1939 but adds a method for each of the 16 filters to reduce CAN traffic by retransmitting only every nth message. The NMEA filters also support fast-packet. CANBridge is compact and light enough for inclusion in many wiring harnesses, but can also be surface mounted via four fixing holes. The case is fully sealed in epoxy resin for high impact and environmental resistance.

OPENVIEWTM S70

Posted on: January 30th, 2024 by Barn3s

Legendary reliability and versatility at the right price

Like its smaller brother, the OpenView S50, the larger OpenView S70 is a full-color configurable display that integrates vital engine, transmission and diagnostic information into an easy-to-read operator interface. The OpenView S70 is easily viewed in full sunlight and contains an optically bonded LCD inside its IP65-rated case to keep it safe in most weather environments. The OpenView S70 comes standard with a glass-front, glove-friendly touchscreen suited to a wide array of applications.

The OpenView S70 introduces the all-new Select Series, retaining the ruggedness, customizability, and excellent performance Enovation Controls’ displays are known for, but with an unprecedented value proposition posed to expand full-color rugged displays to new markets.

The OpenView S70 is programmable with your selected toolset through the power of the new OpenPVTM Software Platform. Graphic interface not included, custom programming required.

A few early sample displays received a portrait orientation only polarizer, making landscape orientation viewability poor when wearing polarized sunglasses. This will be corrected on all production S70 units.

SenderCAN Plus®

Posted on: January 18th, 2024 by josephwill

Our upgraded line of I/O modules designed to simplify data integration with your rugged applications.

Multiple part numbers and fixed input types have now been replaced with versatile software configurable inputs that simplify the customization process for developers & technicians.The SenderCAN Plus Series was designed with the same robust functionality as its predecessor, but now customers themselves can configure their I/O module to precise specifications, maximizing compatibility and efficiency across a wide array of applications.

The SenderCAN Plus Series is a game-changer for applications requiring extended I/O capabilities, often removing the need for an additional controller. Coupled with a free, intuitive Configuration Tool and a comprehensive J1939 library for custom message creation, the SenderCAN PLUS Series empowers developers to tailor their application for reliable data integration in even the harshest environments.

OPENPVTM SOFTWARE PLATFORM

Posted on: January 17th, 2024 by Barn3s

OpenPVTM Software Platform is a sophisticated set of tools that allows developers to design the user experience of an OpenViewTM display with 3rd party development tools like Qt, Crank Storyboard, and HTML5.

The developer toolkit offers programmers:

POWERVISION CONFIGURATION STUDIO®

Posted on: January 17th, 2024 by Barn3s

PowerVision Configuration Studio® software allows developers to customize multiple aspects of a PowerView display®.

The developer suite offers programmers varying levels of control – from base-level display options to in-depth custom programming with C/C++ syntax scripting capabilities. PowerVision Configuration Studio provides several protocols for machine integration and more than 100 commonly used J1939 and NMEA messages and diagnostic functions. PowerVision Configuration Studio is licensed and available on SPARK Software Manager.

MVP-C SERIES

Posted on: January 5th, 2024 by josephwill

The MVP Series is a line of proportional valve controllers each housed in an 18mm DIN connector body.

Several versions are available for open and closed loop applications. Bright LED indicators provide an overview of the operating status. System configuration is accomplished through a clip-on infrared adapter, without removing or opening the connector body. All settings are stored in permanent memory within each unit. Each MVP controller is prewired and permanently sealed.

HGC-2 SERIES

Posted on: January 5th, 2024 by josephwill

The highly cost effective HGC-2 is designed to control a generator driven by a hydraulic motor where speed is controlled by a proportional solenoid valve, either directly at the motor or as part of the pump compensator.

The HGC-2 is a closed loop controller that monitors the AC line voltage from the generator output for outer loop closure and provides the necessary current to a valve coil in order to maintain the desired generator frequency. The HGC-2 has a single LED indicator on the top of the unit to provide an overview of the operating status.

OpenViewTM S50

Posted on: January 2nd, 2024 by Barn3s

Extensive capabilities in a compact package

Like its cousin, the PowerView 500, the OpenView S50 is a full-color configurable display that integrates vital engine, transmission and diagnostic information into an easy-to-read operator interface. The OpenView S50 is easily viewed in full sunlight and contains an optically bonded LCD inside its IP65-rated case to keep it safe in most weather environments. The OpenView S50 comes standard with a glass-front, glove-friendly touchscreen suited to a wide array of applications.

The OpenView S50 anchors the all-new Select Series, retaining the ruggedness, customizability, and excellent performance Enovation Controls’ displays are known for, but with an unprecedented value proposition posed to expand full-color rugged displays to new markets.

OV-S50 is programmable with your selected toolset through the power of the new OpenPVTM Software Platform. Graphic interface not included, custom programming required.

DRC SERIES

Posted on: December 22nd, 2023 by josephwill

The DRC Series offers versatility and ease of use in a narrow DIN-rail mounted housing.

The DRC is an electronic control module for use with proportional solenoid valves in open loop systems. The module will provide current to the solenoids of the valve in response to various types of signals provided by the control system. Indicators on the front of the module provide an overview of the operating status. System configuration is accomplished through a convenient remote terminal. All settings are stored in permanent memory within the unit. The unit is housed in an attractive, compact enclosure

POWERVIEW® U150

Posted on: December 15th, 2023 by josephwill

The Largest Display in the PowerView® Line-Up Brings Ultimate Performance to Rugged Applications

The PowerView® U150 flagship display leads the way for the introduction of the Ultimate Series. A premium-color programmable display capable of integrating vital machine, transmission and diagnostic information into an easy-to-read operator interface.

This large 15-inch display features an expansive 16GB of storage and a high-speed processor that boots quickly and can render high-quality graphics and animations. Designed specifically to build off of the tried-and-true PV1200.

PVU150 is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required

POWERVIEW® U120

Posted on: December 15th, 2023 by josephwill

The Enovation Controls PowerView® U120 Huge, Full-Color Display brings the Ultimate User Experience to Rugged Applications

The PowerView® U120 defines the all-new Ultimate Series as a premium-color programmable display capable of integrating vital machine, transmission and diagnostic information into an easy-to-read operator interface.

This large 12-inch display features an expansive 16GB of storage and a high-speed processor that boots quickly and can render high-quality graphics and animations. Designed specifically to build off of the tried-and-true PV1100.

PVU120 is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required.