NEW

UControl™ MC4‑21‑14‑H8

The uControl MC4-21-14-H8 high-current machine controller offers powerful control with software-selectable 15A outputs. 

This high-current uControl mobile controller offers extra power with (8) 15A PWM outputs with dedicated status LEDs for each high-current output. Combined with 14 standard software selectable outputs, it features a total of 22 outputs and 21 inputs.

Built to perform in high heat and high vibration areas, uControl machine controllers deliver extreme durability with precision control. Featuring multiple CAN interfaces, open/short circuit protection, flexible universal inputs and software selectable outputs, uControl mobile controllers are ready and scalable for a variety of equipment needs and applications.

UCONTROL™ MC4‑21‑14‑H8
  • CE
Specifications Downloads How To Order
X

I/O Summary

  • Inputs (21):
    • Universal Analog / High Frequency: 8
    • Universal Analog: 13
  • Outputs (22) [Software Selectable]:
    • 4A PWM (feedback): 6
    • Dual Range PWM 4A / 0.5 A (feedback): 8
    • 15A PWM (feedback): 8

Hardware

  • CAN 2.0B / J1939: 3 Channels
  • Sensor Supply: (2) 400mA max @ 5 or 10 VDC [Software Selectable Voltage]
  • Connectors:
    • J1A (4 pin) – DTP06-4S
    • J1B (6 pin) – DT06-6S-E008
    • J2 (18 pin – A key) – DT16-18SA-K004
    • J3 (18 pin – B key) – DT16-18SB-K004
    • J4 (18 pin – D key) – DT16-18SD-K004
  • LED Indicators:
    • (1) Green – Power Status
    • (1) White – Software Configurable
    • (1) Blue – Software Configurable
    • (8) High Current Output Status
      • Output Inactive: Indicator is Dark
      • Output Active: Solid Green
      • Output in Fault: Blinking Green with code indicating fault

Power Supply

  • Nominal Supply Voltage: 6-32 VDC, Nominal Operation @ 12 /24 VDC
  • Peak Voltage During Load Dump: Power supply suppression limits voltage to 55 Volts for duration of Load Dump Event (2 ohm supply)
  • Maximum Current: 100 A
  • Idle Current 12/24 VDC:
    • < 200mA @ 12VDC
    • < 100mA @ 24VDC
  • Standby Current 12/24 VDC:
    • < 5mA @12VDC
    • < 2.5mA @ 24VDC
  • Node/Sleep Pin: Control sleep and wake settings

Physical & Environmental

  • Operating Temperature Range: -40 °C to +105 °C (May be limited to +85°C at full rated current)
  • Storage Temperature Range: -40 °C to +125 °C
  • Operating Altitude: 0-4000 m
  • IP Rating: IP67 (IP69K with harness-side rated boots)
  • Vibration: 5.82 Grms, 8 hours per axis
  • Shock: ±50G, 6ms
  • Housing: Cast aluminum housing, soft-gel potted for extreme ruggedness and durability
  • EMC: 2014/30/EU (CE / E-MARK), CISPR 11, CISPR 25, EN 60945, EN 61000-4-2, EN 61326-1, SAE J1113-2, SAE J1113-4, SAE J1113-11, SAE J1113-12, SAE J1113-13, SAE J1113-21, SAE J1113-22, SAE J1113-26, SAE J1455
  • Dimensions: 250 mm x 140 mm x 60 mm (refer to Figure 2.1)
  • Weight: Less than 5 pounds

 WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.

Additional product documentation can be found on our product support website or by clicking the Help Center button above.

Part Number Model/Description
58700007 MC4-21-14-H8 Controller
58700011 uControl Programming Kit
58000012 Harness: 10',MCX,J2,KEY A, 18S,BLUNT
58000013 Harness: 10',MCX,J3,KEY B, 18S,BLUNT
58000015 Harness: 10',J4,MC4-H8,KEY D 18S,BLUNT
58000017 Harness: 10',J1,MCX, 4S&6S CONN,BLUNT
78001440 Conector Kit: NR#KIT,MC4H8,CONNECTORS/ TERMINALS

Search form