PowerView® 485

The PV485 is an all-in-one color display and controller designed to meet the needs of modern electronic engines and equipment applications.

It’s small but rugged design offers a wide array of configurable I/O, including RS485, to support both mechanical and J1939 electronic engines. The PV485 also supports Tier 4 and stage IV engines, helping to make your transition to Tier 4 easier. The display’s bonded LCD can easily be viewed in full sunlight, and its rugged tactile soft keys and durable design make it a perfect solution for all types of environments and applications.

PV485 is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required.

Murphy’s PowerView 485
Specifications Downloads How To Order
X
  • Computing
    • Processor: Freescale iMX35@ 532 MHz (32-bit)
    • Operating System: QNX® Realtime Operating System
    • Storage: 256 MB flash memory
  • Display
    • Screen Size: 4.3 inches (109mm)
    • Type: Bonded TFT LCD with LED backlight, 16-bit color
    • Resolution: 480 × 272 (WQVGA)
    • Brightness: 900-1000 cd/m2 (30,000 hr lifetime)
  • Hardware
    • Keypad: 5 tactile configurable soft keys
    • Real Time Clock: Available with battery backup
    • Connectors: (1) AMPSEAL 35-pin
  • Communication
    • CAN: (1) CAN 2.0B, J1939 and FreeForm CAN support
    • Serial: RS-485 serial
    • USB: (1) USB 2.0 full speed host
  • Electrical
    • Operating Voltage: 6 – 32 VDC, reverse polarity and load-dump protected
    • Power Consumption: 10W max
    • Outputs:
      • (4) 500 mA switched low-side open-drain
      • (1) Analog – 0-5V
      • (1) Frequency output (2Hz – 3KHz)
    • Inputs:
      • (6) Analog
        • (4) Software Configurable (0-5V, 4-20mA, Resistive)
        • (2) Voltage (for two batteries)
      • (3) Discrete digital
      • (1) Frequency (2Hz – 10kHz) 5V pk-pk min, 49V pk-pk max
  • Environment
    • Operating Temperature: -40˚C to +85˚C (-40˚F to +185˚F)
    • Storage Temperature: -40˚C to +85˚C (-40˚F to +185˚F)
    • Protection: IP67, front and back, for outdoor use
    • Vibration: 7.86 Grms (5 – 2000Hz), 3 axes
    • Shock: ±50G in 3 axes
    • EMC/EMI: SAE J1113, ISO 13766, CE per 2014/30/EU
    • EMC/EMI: SAE J1113, CE – EN61000-6-2, EN12895, ISO 13766
    • Case: Polycarbonate / ABS

 WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.

Additional product documentation can be found on our product support website or by clicking the Help Center button above.

Part Number Description Notes
78700639 PV485 Display
78000783 Mounting Installation Kit Accessories
78000815 Rear-Mount Bracket Installation Kit Accessories
78700590 PV485 Programming Kit (programming harness, power adapter, USB cable) Accessories
78090077 PV485 Programming Harness Accessories
78000824 Wiring Harness, Loose Leads, 24 inches Accessories
78000966 Connector Kit (Includes: (1) 35-position connector, (40) 20/16 GA terminal socket, (35) seal plugs) Accessories

Search form