• Murphy by Enovation Controls

PowerView® 1100

The Murphy PowerView® 1100 display streamlines size and speed in a single display.

The PowerView 1100 is a full-color configurable display that integrates vital engine, transmission and diagnostic information into an easy-to-read operator interface. This large 10.6-inch display features an expansive 8GB of storage and a high-speed processor that boots quickly and can render high-quality graphics and animations. The display’s bonded LCD can easily be viewed, even in full sunlight, and its glove-friendly touchscreen and rugged design make it a perfect solution for all types of environments and applications. The PV1100 is available in portrait or landscape models.

PV1100 is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required.

  • CE (European Conformity) mark
  • Tier 4 Final / Euro Stage V Ready
Specifications Downloads How to Order
Specifications Drawer: 
  • Computing
    • Processor: Renesas® R-Car M2 with Arm® Cortex®-A15 dual-core processor @ 1.5 GHz (32-bit)
    • Operating System: QNX® Realtime Operating System 
    • Storage: 8 GB flash memory
    • RAM: 512 MB DDR3-SDRAM
    • Graphics: Renesas graphics processor 
  • Display
    • Screen Size: 10.6 inches (231.36 mm × 138.82 mm)
    • Type: LVDS TFT LCD with LED backlight, 24-bit color
    • Resolution: 1280 × 768
    • Contrast Ratio: Typ. 1000:1
    • Brightness: 1000 cd/m2
    • Surface: Anti-glare
    • Touch Panel: Projected capacitive (PCAP) with glove touch
  • Hardware
    • Real Time Clock: Available with battery backup
    • Connectors:
      • (2) AMPSEAL 23 pin (main)
      • (1) AMPSEAL 35 pin (on some variants)
      • (1) M12 5 pin (on some variants)
      • (1) USB pigtail
      • (1) Antenna jack (on some variants)    
    • Video Input: (3) NTSC/PAL (single channel viewable)
  • Communication
    • CAN: (2) CAN 2.0B according to ISO 11898-2, J1939 and proprietary messaging
    • Serial: RS-485 serial (Modbus: master or slave)
    • USB: USB 2.0 full speed host
  • Electrical
    • Operating Voltage: 6 – 36 VDC, reverse polarity protected
    • Outputs:
      • (1) 500 mA switched low-side
      • (1) Frequency output (2Hz – 3KHz)
    • Inputs:
      • (3) Analog 0 – 5 VDC, 4-20 mA, resistive, 10-bit resolution
      • (5) Discrete digital, active-high
      • (1) Frequency in (2Hz – 10kHz) 5V pk-pk min, 49V pk-pk max
  • Environmental
    • Operating Temperature: -40˚C to +70˚C (-40˚F to +158˚F)
    • Storage Temperature: -40˚C to +85˚C (-40˚F to +185˚F)
    • Protection: IP66 and IP67, front and back, for outdoor use
    • Vibration: 3.9 Grms (10 – 350Hz), 3 axes (ISO 15003)
    • Shock: ±50G in 3 axes
    • EMC/EMI: SAE J1113, ISO 13766, CE per 2014/30/EU

WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.

Additional product documentation can be found on our product support website or by clicking the Help Center button above.

Part NumberModel/DescriptionNotes
78700636PV1100, Touch, Non-connected, LandscapeDisplay
78700654PV1100, Touch, Non-connected, PortraitDisplay
78090098Programming Kit, PV780/PV1100Accessories
78001277Kit, Mounting Bracket, PV1100Accessories
78001055Harness, Gray Connector, USBAccessories
78001056Harness, Gray Connector, Flying LeadsAccessories
78001057Harness, Black Connector, Flying LeadsAccessories
78001017Harness, Black Connector, DevelopmentAccessories
78001018Harness, Gray Connector, DevelopmentAccessories
78090069Harness, PV750/PV1100 Conversion, Power/CANAccessories
78051813Bezel, PV1100Accessories