Specifications Drawer:
- Power Supply:
- Operating Voltage: 8-32 VDC, reverse battery polarity & load dump protected
- Current consumption: 18W Max without 2 2A High-sides, active, 146W Max with 2 2A High-sides active
- Inputs (15):
- (6) Digital, configurable (active on High, Low, Open)
- (8) Analog, configurable (4-20 mA, 0-5V, resistive or digital ground)
- (1) Frequency, supporting: Magnetic pickup (30 Hz - 10 kHz, 2.0 VAC-120 VAC) and Engine Alternator (30 Hz - 10 kHz, 4.5 VRMS - 90 VRMS)
- Outputs (13):
- (6) Relay, Form C (dry / volt-free), 10A
- (2) Low-side FET (–DC), 1A
- (2) High-side FET (+DC), 2A
- (2) +5VDC, 200mA
- (1) 0-5VDC High Impedance Analog
- Communications:
- (2) CAN: J1939
- (1) RS485: Modbus RTU
- (1) USB: Programming
- Mating Connector:
- Delphi, SICMA 90 Position
- Physical/Environmental:
- Enclosure Material: Polycarbonate
- Dimensions (WxHxD): 7.60 x 7.35 x 2.43 in. (193 x 189.7 x 61.6 mm)
- Mass: 0.9kg (2.0lb)
- IP rating: IP67 Complete Module
- Operating Temperature: -40° to +85°C (-40° to 185°F)
- Storage Temperature: -40° to +85°C (-40° to 185°F)
- Vibration: 7.86 Grms (5-2000 Hz), 3-axis random
- Shock: ±50G, 3-axis
- EMI/RFI: SAE J1113
- Shipping Weight: 2lbs. 7.1 oz (1.11 kg.)
- Shipping Dimensions: 9.5 x 9 x 5 in. (241 x 229 x 127 mm.)
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive
harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.
Additional product documentation can be found on our product
support website or by clicking the Help Center button above.