Hello
I have some issue to convert Free form message with offset and factor.. I need to creat several variable in a programm mod to convert my free form can message. Have you a other way to convert it?
Direct convertion (factor and offset) for free form message
- vincentbraillard
- Posts: 1
- Joined: Tue Dec 17, 2013 4:20 am
- stalley
- Enovation Controls Development
- Posts: 618
- Joined: Tue Mar 18, 2014 12:57 pm
Re: Direct convertion (factor and offset) for free form mess
Hello vincentbraillard,
If you haven't seen this post, viewtopic.php?f=7&t=712&p=1848&hilit=re ... fset#p1848 It is most helpful. Kristian has also provided an example that could help.
If you need more information after reading the post, please let us know what device (a monochrome or color display) you are attempting to configure. Also, if you have some conditions that affect the calculations.
We will do our best to help. You will be interested to find that with the soon to be released, PowerVision Configuration Studio 2.8, the offset and resolution are part of defining a parameter on the Free Form messages. We won't have to do the additional calculation in the configuration!
If you haven't seen this post, viewtopic.php?f=7&t=712&p=1848&hilit=re ... fset#p1848 It is most helpful. Kristian has also provided an example that could help.
If you need more information after reading the post, please let us know what device (a monochrome or color display) you are attempting to configure. Also, if you have some conditions that affect the calculations.
We will do our best to help. You will be interested to find that with the soon to be released, PowerVision Configuration Studio 2.8, the offset and resolution are part of defining a parameter on the Free Form messages. We won't have to do the additional calculation in the configuration!
Sara Talley
Software Engineer
Enovation Controls
Software Engineer
Enovation Controls