Hello everybody,

can anybody tell me the exact CAN-Bus bit-timing configuration of the HV7x0 displays? Do they follow the recommendations of SAE J1939-11: Samplepoint at ~87,5% ?

We need the bit timing of each device on the bus to calculate the maximum bus length.

Thx

Here are the timings done by the engineer:

This is the sample point %:
Bit Sample Point
Rate kbps at %
1000 70.8
800 86.7
500 87.5
250 87.5
125 87.5
100 87.5
50 87.5
20 87.5
10 87.5

Perfect, thank you for your quick reply!