PowerVision Studio 2.7 for MPC-20 Patch 4 Release

PowerVision For Controllers is a simplified version of PowerVision used to configure controllers and displays. This version lets you create customized configurations for controllers such as the MPC-20/MPC-10 without needing to know how to write programs in PowerVision. It is freely available to anyone that wants to configure a Murphy by Enovation Controls controller.
stalley
Enovation Controls Development
Enovation Controls Development
Posts: 618
Joined: Tue Mar 18, 2014 12:57 pm

PowerVision Studio 2.7 for MPC-20 Patch 4 Release

Post by stalley » Mon Nov 10, 2014 10:12 am

Release 2.7 Patch 4

Enovation Controls is proud to announce the release of PowerVision 2.7. Patch 4.

This release provides
  • A CAN-Frame layer bit in extended frame format, the SRR (Substitute Remote Request), is now
    transmitted recessive (1). Prior to this change, the bit was being transmitted dominant (0). The
    change was made in order for the CAN messages transmitted from a display to be compliant with the CAN
    specification, ISO 11898. With this change, on networks with both standard and extended frame traffic,
    receivers of messages from a display will now be able to give standard frame messages priority over the
    extended frame messages.
  • Corrected an issue in the Page Designer where the "Show in View" was hidden.
PowerVision.Installer.MPC20.2.7.10475.zip
MPC-20 Release of PowerVision 2.7 Patch 4
(63.95 MiB) Downloaded 130 times
A user's guide is available here.

You must register and be logged in to download this file
Sara Talley
Software Engineer
Enovation Controls
Top

Return to “PowerVision for Controllers”