Serial Port

Discuss issues and ideas you have to configuring displays with PowerVision
BrianM
Posts: 8
Joined: Thu Sep 27, 2012 10:51 am

Serial Port

Post by BrianM » Fri Jan 11, 2013 4:30 am

Hi

There is a serial port on the HV700, in Powerview 2.3 setup up page there is an option to set the Protocol as "None (Raw Serial)"

How do you use this i.e. how do you send data either from a Script or State Engine

I cant find this documented anywhere, are there any sample configs?

Regards, Brian
Top
BrianM
Posts: 8
Joined: Thu Sep 27, 2012 10:51 am

Re: Serial Port

Post by BrianM » Wed Feb 27, 2013 2:40 am

Bump

Anybody?
Top
jedwards
Enovation Controls Development
Enovation Controls Development
Posts: 16
Joined: Fri Jul 30, 2010 8:24 am

Re: Serial Port

Post by jedwards » Wed Feb 27, 2013 8:41 am

At the moment, the serial port in None mode is essentially off. There is not currently an API mechanism to write or read from the serial port. The only user available API would be to use the MODBUS protocol with the serial port.
Top
BrianM
Posts: 8
Joined: Thu Sep 27, 2012 10:51 am

Re: Serial Port

Post by BrianM » Thu Feb 28, 2013 6:41 am

Thank you
Top

Return to “PowerVision Programming and Configuration”