I need your help!
I have to program a fwMurphy PV450 display. Some of it already worked but right now I reached a point where I lost the overview
Here is what may program should be able to display:
- An Accumulator gets charged (bar gauge). While it gets charged, there should be a red dotted line, that simulates a moving and I want to show the status of charge in %. Additionally there should be a blue button that shows a text: Regen
- When the accumulator gets discharged, it should show a green dotted line, the bar gauge should get to 0%. Additionally there should be a blue button that shows a text: Assist
And everytime I press the upper right button it should switch between a green yellow and red button and show additional information like Warning etc
You can have a look at my configuration data. Most of it was programmed by a co-worker, so I would be really thankful if you could help me and get this working and show to me, what I have to improve!
If you need additional information, please let me know
Thx
mok1rhi
