Hi Everyone,

I would like to request the functionality to be able to export all of a configurations Diagnostic Trouble Codes (DTC's) out of one configuration and into another. This would greatly help with decreasing the amount of time it takes to develop a PV350/380 based on a previously developed config (PV450 or PV750/780). In PowerVision 2.6 this would be located under the programming tab, and then under DTC Setup.

I would also like to be able to import/export complete applications, this would greatly help modularize code features. In 2.6 this would be located under the Applications tab, and on the left hand side under the applications list tree, External Applications. I have attached a screenshot of the External Applications feature that I am discussing.

Thank you for your time and consideration.

Hi,
You can export all the DTC messages under Programming tab.
1) Go to Tools -> Export Configuration Components.
2) Under Export Configuration items window, Select Programming tab.
3) Select all the DTC Messages you would like to export.

Please see that attached document for the picture.

Thanks,
PUplaonkar
FW Murphy