• Murphy
EMEA Region Only

76.TS

A compact and economical temperature switch for signalling high temperature faults, the 76.TS is ideally suited for direct mounting to engines, pumps, compressors and gearboxes.

The SPDT switch contacts are factory set to operate at 105°C rising. Connection to the contacts is via ¼” (6.25mm) blade terminals.

Specifications Downloads How to Order
X
Specifications Drawer: 
  • Temperature ratings
    • Operating range: 20 to 140°C (68 - 284°F)
    • Switch setting: 105°C (221°F) rising, non-adjustable
    • Switch differential: auto reset at approx 9°C below rising switch setting
    • Tolerance: +/– 3.0°C
    • Max. over temperature: 25°C above set point
  • Contacts
    • Contact type: SPDT contacts (volt-free/dry)
    • Rating: 5A max @ 24VDC (resistive), 2A max @ 24VDC (inductive)
    • Connection terminals: 6.35mm (1/4 in.) blades
  • Physical
    • Body type/material: 32 A/F hex, passivated steel, zinc plated
    • Diaphragm material: stainless steel
    • Bulb material: brass
    • Case sealing: IP65
    • Max external bulb pressure: 12 bar / 174 psi / 1200 kPa
    • Process connection: 1/2 in. NPTF
    • Max. tightening torque: 60 Nm
    • Max. body temperature: 120°C (248°F)
    • Acceleration: 8g max
    • Weight: approx 140g

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.

Literature Drawer: 

Additional product documentation can be found on our product support website or by clicking the Help Center button above.

Primary Method - Table: 
Part NumberModelDescription
Contact EMEA Sales76.TS.D10576.TS temperature switch, 1/2” NPTF, 105° rising