EMEA REGION ONLY

76.TS Temperature Switch

A compact and economical pressure switch for extended duty applications. The 76.PS is primarily designed for direct engine mounting, to provide electrical signalling of a low oil pressure fault.

The isolated switch contacts are factory set to close below 15 psi (1 bar), but may be adjusted between 14 and 24 psi (1.0 and 1.6 bar). The polyimide diaphragm is compatible with air, engine oil and other hydrocarbon media. (Contact with waterbased fluids is not recommended.)

76.PS PRESSURE SWITCH
Specifications Downloads How To Order
X
  • Temperature ratings
    • Operating range: 20 to 140°C (68 – 284°F)
    • Switch setting: 105°C (221°F) rising, non-adjustable
    • Switch differential: auto reset at approx 9°C below rising switch setting
    • Tolerance: +/– 3.0°C
    • Max. over temperature: 25°C above set point
  • Contacts
    • Contact type: SPDT contacts (volt-free/dry)
    • Rating: 5A max @ 24VDC (resistive), 2A max @ 24VDC (inductive)
    • Connection terminals: 6.35mm (1/4 in.) blades
  • Physical
    • Body type/material: 32 A/F hex, passivated steel, zinc plated
    • Diaphragm material: stainless steel
    • Bulb material: brass
    • Case sealing: IP65
    • Max external bulb pressure: 12 bar / 174 psi / 1200 kPa
    • Process connection: 1/2 in. NPTF
    • Max. tightening torque: 60 Nm
    • Max. body temperature: 120°C (248°F)
    • Acceleration: 8g max
    • Weight: approx 140g

 WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.

Additional product documentation can be found on our product support website or by clicking the Help Center button above.

Part Number Model Description
Contact EMEA Sales 76.TS.D105 76.TS temperature switch, 1/2” NPTF, 105° rising

Search form