Specifications Drawer:
L150
- Maximum Temperature: 250° F (121° C)
- Maximum Operating Pressure: 25 PSI (172 kPa)
- Case: Die cast aluminum, polyurethane coated; approximate dimensions; 4-1/2 x 4-3/4 x 2-3/4 in. (114 x 121 x 70 mm)
- Mounting Holes: (2) 9/32 in. (7 mm) diameter at 4-1/2 in. (114 mm) on center
- Float: Brass
- Lens: Polycarbonate
- O-rings: Saturated Nitrile, are suitable for coolant or hydrocarbons
- Gasket: Nitrile
- Vent Tube: 1/4 x 5 in. (6 x 127 mm) copper cane with 1/4 NPT x 1/4 in. (6 mm) tube fitting
- Contact Rating: 2 A @ 30 VAC/DC. Wire: (1) 16 AWG x 26 in. (1.5 mm 2 x 660 mm) with terminals
- Shipping Weight: 29 oz. (0.82 kg.)
- Shipping Dimensions: 5-1/4 x 5-1/4 x 5-1/2 in. (133 x 133 x 140 mm)
EL150K1
- Maximum Temperature: 250° F (121° C)
- Maximum Operating Pressure: 25 PSI (172 kPa)
- Case: Die cast aluminum, polyurethane coated; approximate dimensions; 5 x 4-3/4 x 2-3/4 in. (127 x 121 x 70 mm)
- Enclosure Rating: IP35
- Mounting Holes: (2) 9/32 in. (7 mm) diameter at 4-1/2 in. (114 mm) on center
- Float: Brass
- Lens: Polycarbonate
- O-rings: Saturated Nitrile, are suitable for coolant or hydrocarbons
- Gasket: Nitrile
- Vent Tube: 1/4 x 5 in. (6 x 127 mm) copper cane with 1/4 NPT x 1/4 in. (6 mm) tube fitting
- Snap-Switch: SPDT rated 10 A @ 125 VAC; 0.5 A @ 125 VDC; 10 A 30 VDC
- Wire: (3) 18 AWG x 14 in. (1 mm 2 x 356 mm)
- Shipping Weight: 42 oz. (1.2 kg.).
- Shipping Dimensions: 5-1/4 x 5-1/4 x 5-1/2 in. (133 x 133 x 140 mm)
EL150EX
- Maximum Temperature: 250° F (121° C)
- Maximum Operating Pressure: 25 PSI (172 kPa)
- Case: Sand cast aluminum, painted; approximate dimensions: 6-1/2 x 5-3/4 x 5-1/4 in. (165 x 146 x133 mm)
- Enclosure Rating: IP65
- Mounting Holes: (2) 5/16 in. (8 mm) diameter at 5-1/2 in. (140 mm) on center
- Float: 304 Stainless steel
- Lens: Tempered glass
- O-rings: Saturated Nitrile, suitable for coolant or hydrocarbons
- Gasket: Nitrile
- Vent Tube: 1/4 x 5 in. (6 x 127 mm) copper cane with 1/4 NPT x 1/4 in. (6 mm) tube fitting and 1/2 NPT to 1/4 NPT reducer fitting
- Snap-Switch: SPDT rated 10 A @ 125 VAC; 0.5 A @ 125 VDC; 10 A 30 VDC
- Wire: Wired to terminal block
- Laboratory Approvals: CSA Listed for Hazardous Locations Class I, Division 1, Groups C & D
- Shipping Weight: 5 lbs. (2.26 kg.)
- Shipping Dimensions: 6-1/2 x 6-3/4 x 6-3/8 in. (165 x 171 x 162 mm)
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive
harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.
Additional product documentation can be found on our product
support website or by clicking the Help Center button above.