• High Country Tek (HCT)

EVC

The EVC is one of the most versatile and precise electronic valve controllers on the market today.

Configured using an intelligent graphical user interface (GUI), the EVC can be used in simple proportional single- and dual-coil applications or in more complex closed-loop pressure/speed control solutions. The command signal can be either industry standard voltage (0 to 5 or 0 to 10V) or current (4 to 20mA) while the mobile industry can take advantage of the SAE J1939 compatibility for horsepower limiting or anti-stall applications.

Specifications Downloads How to Order
X
Specifications Drawer: 
ItemEVC SeriesDescription
FunctionMulti-Function Digital Valve DriverGeneral-purpose single- or dual-coil open loop PWM valve driver
Number of Coils1x single or dual0 to 3.0 Amps
Control InputVoltage, Current or SAE J19390-5 V, 0-10 V, 4-20 mA & SAE J1939
Connector12-Way DeutschDTF12-12PB
Graphical User Interface (GUI)P/N: 023-00259Set-up & diagnostic software - Free download
PC CommunicationsP/N: 108-00134Mini USB to 5 Pin, 1 Meter Long
Feedback InputFrequency / pulse only - software selectable3 to 30 kHz
Ref Output+5-V stabilized voltage for joystick, pot. e.t.c.+5-V @ 5 mA (current limited 1 KΩ )
Physical125 x 61 x 46 mm2x # 8 Mounting screws
Mobile EquipmentNEMA 6P/ IP67, 69KSolid potted
Temperature ºC-40 to +85 Deg. COperating
Voltage9 to 32 VdCReverse polarity protection and transient protection
CertificationsSAE J1455 

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.

Additional product documentation can be found on our product support website or by clicking the Help Center button above.

ModelDescription
EVCEVC Controller