• High Country Tek (HCT)

EMC Series

The EMC is a compact but powerful single fan bank controller for use with +12Vdc or +24Vdc variable speed brushless fans.

The controller provides a low current varying PWM signal to the fan/s based on command inputs. Setup and system monitoring are easily accomplished through the graphical user interface (GUI). This controller is complete with many selectable input and output configurations along with On-Demand and Set-Point command modes. The health of the fan system can easily be determined by the diagnostic LED’s, the diagnostic J1939 CAN Bus messages from the controller, and by monitoring the system using the software interface.

  • CE (European Conformity) mark
Specifications Downloads How to Order
X
Specifications Drawer: 

Item

EMC

Description


Function		Electric and Fan System Controller for Mass Transit and Off-Highway VehiclesClosed loop fan controller with reversing (purge), SAE J1939 CAN messages, temperature sensor inputs, and fan diagnostics
Analog Inputs2Thermistor or 0-5V


Digital Inputs		3On/Off switches – Ignition, Reverse, Fire
6Fan diagnostics for system control
CAN bus, SAE J19391CAN bus 2.0B - Command input and diagnostics


Proportional Outputs

1		0.5A PWM 0 to 100% - Variable speed fan bank control - sourcing or sinking, Max 500mA with short circuit protection
PWM Dither Frequency33 to 1000HzSoftware adjustable

Digital Outputs
1		500mA On/Off ouput for reverse or alarm indicators
Reverse cycle (purge) featureYes'Purge' or 'De-Ice' for E-Fan and hydraulic fan
ConnectorDTF15-12PB12-pin Deutsch, Male
Mating Connector KitP/N: 999-1015512-pin connector kit

Graphical User Interface		023-00561Set-Up & Diagnostic Software - Free Download
PC-EMCSet-Up & Diagnostic Software - USB Only
Programming CableP/N: 108-00134USB Mini (2M)
Physical75L x 45W x 73H mmEnclosure Size
Mounting3 x No.8 (5mm), SAE Grade 2 screwsMounting hardware
Housing TypeSolid PottedFameproof, 2 part epoxy resin, black
NEMA/IP Rating6P/IP67Solid potted

Temperature ºC		-40 to +85 Deg. COperational Temperature
-60 to +150 Deg. CStorage Temperature
Voltage9 to 32 VDCReverse Polarity/J1455 load dump protection
Current Consumption+ 200mALoad current quiescent Max
CertificationCE, E-Mark*Check availability*

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.

Literature Drawer: 

Additional product documentation can be found on our product support website or by clicking the Help Center button above.

ModelDescription
EMCEMC Controller