• High Country Tek (HCT)

DVC 700 Series

The DVC700 series is the most durable and reliable electro-hydraulic control solution in the hydraulic industry.

Widely used in the mining and construction industries, the DVC700 controllers are intelligently designed to be both configurable and programmable so as to maintain simplicity where needed without sacrificing the more complex feature capabilities. DVC710 and DVC707 are the master controllers and their flexible hardware and software allow them to run many hydraulic control applications as a single module. DVC710 & DVC707 and all DVC expansion modules are packaged in small rugged enclosures. All connectors are sealed and each module is encapsulated to withstand extreme conditions in harsh operating environments. The hardened enclosures allow you to locate the DVC modules near the sensors, valves, etc. they will control. This can greatly minimize the amount of cabling in your system and significantly lower your costs.

Specifications Downloads
X
Specifications Drawer: 

DVC707

ItemFeatureDescription
FunctionStandalone ModuleCompliant with DVC System
Universal Inputs (Digital/Analog/Pulse)30 to 20 mA / 0 to +5VDC, 0 to 8KHz. The three Digital Inputs may be configured as Pulse inputs for a total of 6 Pulse inputs, Quadrature Capable
Analog Inputs20 to +5V, 10-bit resolution
Digital / Pulse Inputs3All digital inputs are sinking inputs, 1 System Enable Configurable
Proportional PWM Outputs2 Output GroupsAuto-Range, 0 to 90 mAmps & 0 to 3.0 Amps.
Digital Outputs6 HS3.0 Amps each (sourcing), short protected plus software Open and Short detection.
Ref/Com Output15V @ 250mA, used to drive joysticks, Potentiometers and Hall Effect Sensors, shorts protected
CAN Bus, SAE J19391Can Bus 2.0B – This port is used to communicate with either other DVC modules or the J1939 Bus.
RS2321Programming Port and DVC61 (4 x 20 LCD) Display port
Customer Programmable SoftwareP/N: 998-00009Intella® 10 Software Suite - Call for pricing
Intella Software Program LoaderP/N: 023-00245Intella® 10 Program Loader Monitor (PLM) - Free Download
Status Indicators4User Programmable LED's, R/G
Mobile EquipmentIP67, 69KSolid potted, 30-Pin Metri-Pack connector
Temperature ºC-40 to 85 Deg. COperating
Temperature ºC-40 to 100 Deg. CStorage
Voltage9.0 to 30 VDCReverse polarity protection and transient protection
CertificationsCEDeclaration of Conformity

DVC710

ItemFeatureDescription
Function700 Series system Controller ModuleMaster controller for DVC700 System
Universal Inputs (Digital/Analog/Pulse)30 to 20 mA, 0 to +5VDC, 0 to +10VDC, -1 to +1VDC. PWM% configurable, 30Hz to 1.5 KHz.
Analog Inputs30 to +5V, 10-bit resolution
Digital Inputs8All digital inputs are sinking inputs
Proportional PWM Output's3 Output GroupsAuto-Range, 0 to 3.0 Amps. Configurable to automatically work with the digital outputs for a variety of valve configurations. Up to 3 dual coil valves or 9 digital valves.
Digital Outputs6 HS3.0 Amps each (sourcing), short protected plus open protected
CANBus, SAE J19392Can Bus 2.0B – This port is used to communicate with either other DVC modules or on the J1939 Bus.
RS2321Programming Port and DVC61 (4 x 20 LCD) Display port
Mating Connector KitP/N: 999-1007748-Pin MetriPack
Customer Programmable SoftwareP/N: 998-00009Intella® 700 Software Suite
-Call for pricing
Intella Software Program LoaderP/N: 023-000245Intella® 700 Program Loader Monitor (PLM) -Free Download
Status Indicators43 system controlled status indicators and 1 user programmable status LED.
Mobile EquipmentIP68Solid potted, 18 & 30-Pin Metri-Pack connector
Temperature ºC-40 to 85 Deg. COperating
Voltage9.0 to 32 VDCReverse polarity protection and transient protection
CertificationsCEDeclaration of Conformity

DVC725

ItemFeatureDescription
Function700 Series system Controller ModuleExpansion Module to the DVC710 or DVC707 Master Controllers
Digital Inputs40All digital inputs are sinking inputs
CANBus, SAE J19391Can Bus 2.0B – This port is used to communicate with either other DVC modules or on the J1939 Bus.
RS2321Programming Port
Mating Connector Kit  
Customer Programmable SoftwareP/N: 998-00009Intella® 700 Software Suite
Intella Software Program LoaderP/N: 023-000245Intella® 700 Program Loader Monitor (PLM)
Status Indicators43 system controlled status indicators and 1 user programmable status LED.
Mobile EquipmentIP67, 69KSolid potted, 18 & 30-Pin Metri-Pack connector
Temperature ºC-40 to 85 Deg. COperating
Voltage9.0 to 32 VDCReverse polarity protection and transient protection
CertificationsCE*Certificate available upon request

DVC745

ItemFeatureDescription
Function700 Series System Controller ModuleExpansion Module to the DVC710 or DVC707 Master Controllers
Digital Outputs12 HS3.0 Amps each (sourcing), short protected plus open protected
CANBus, SAE J19391Can Bus 2.0B – This port is used to communicate with either other DVC modules or on the J1939 Bus.
RS2321Programming Port
Mating Connector Kit  
Customer Programmable SoftwareP/N: 998-00009Intella® 700 Software Suite
Intella Software Program LoaderP/N: 023-000245Intella® 700 Program Loader Monitor (PLM)
Status Indicators43 system controlled status indicators and 1 user programmable status LED.
Mobile EquipmentIP67, 69KSolid potted, 30-Pin Metri-Pack connector
Temperature ºC-40 to 85 Deg. COperating
Voltage9.0 to 32 VDCReverse polarity protection and transient protection
CertificationsCE*Certificate available upon request
Literature Drawer: 

Additional product documentation can be found on our product support website or by clicking the Help Center button above.