PowerView® 25

The PowerView 25 is an engine and diagnostic display in an economical, compact package.

This J1939-compliant device provides electronic engine parameter data, is simple to install, matches the PowerView line of rugged displays and can be powered by 12-volt or 24-volt systems. The PV25 is equipped with two push buttons to quickly access a convenient menu. In addition, a back-lit graphic display and two LEDs indicate Active-fault Alarm or Shutdown status. Active and Stored Fault messages display the SPN (Suspect Parameter Number), FMI (Failure Mode Indicator) and the OC (Occurrence Count) using the SAE J1939 protocol. The PV25 displays up to 20 standard J1939 parameters in standard or metric units.

Murphy’s PowerView 25
Specifications Downloads How To Order
  • Engine Parameters:
    • Engine RPM
    • Engine Oil Pressure
    • Engine Hours
    • Coolant Temperature
    • ITA/Stage IIIB Parameters
    • Active Service Codes
    • System Voltage
    • Stored Service Codes
  • Tier 4 / Stage IIIB/IV Compliant Ready
  • Operating Voltage: 6 VDC minimum to 36 VDC maximum
  • Power Supply Operating Current:
    • 460mA max @ 12 VDC
    • 810mA max @ 24 VDC
  • Reversed Polarity: Withstands reversed battery terminal polarity


  • Operating Temperature: -40° to 158°F (-40 to 70°C)
  • Storage Temperature: -67° to 185°F (-55 to 85°C)
  • Sealing: IP68
  • CAN Bus: SAE J1939 compliant


  • 4-pin AMP Mini-universal Mate-N-Lok Connector
  • AMP Plug: P/N 172338-1
  • AMP Socket: P/N 171639-1 (4 each, assumes 18 gage wire. See
  • AMP Plug specification to match socket and wire size.)
  • Maximum Panel Thickness: 3/8 inch (9.6 mm)
  • Shipping Weight: (all models) 0.2 lb. (0.1 kg)
  • Shipping Dimensions: (all models)
    3-7/8 x 2-3/4 x 2-3/4 in.
    (98.4 x 69.85 x 69.85 mm)

 WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.

Additional product documentation can be found on our product support website or by clicking the Help Center button above.

Part Number Model/Description Notes
78700541 PV25 Bezel type (flat lens) AB = A20 (Black) Displays
78700571 PV25 Bezel type (flat lens) BB = Low Profile SAE (Black) Displays
78000613 Wiring Harness PVW-PDA-12 PowerView 10 CAN & Power Accessories
78000614 Wiring Harness PA-30View 10 Loose Wiring Accessories
78000480 Terminating Resistor, PVMJRm Accessories

Search form