• Murphy by Enovation Controls

PowerView® 101

PowerView 101 offers a simple connection to optional components and displays over 50 standard SAE J1939 parameters

The PowerView PV101 display is a multifunction tool that enables equipment operators to view standard engine and transmission parameters and active/stored trouble codes. The display can show a single or a four-parameter simultaneous display with text descriptions for most common fault conditions. The enhanced alarm indicators have ultra-bright alarm and shut-down LEDs

  • Tier 4 / Euro Stage IV Ready
Specifications Downloads How to Order
X
Specifications Drawer: 

Operating Voltage: 8 - 32 VDC

Reversed Polarity: Withstands reversed battery terminal polarity indefinitely within operating temperatures

Environmental

  • Operating Temperature: -40° to +185° F (-40°  to +85° C)
  • Display Viewing Temperature: -20° to +185° F (-29°  to +85° C)
  • Storage Temperature: -40° to +185° F (-40° to +85° C)
  • Environmental Sealing: IP68, ± 5 PSI (± 34kPa)

Power Supply Operating Current

  • (@ 14VDC) 52 mA min.: 300 mA max
  • (@ 32VDC) 1A max (with LCD heater)

CAN Bus: SAE J1939 compliant

Case: Polycarbonate/polyester

Maximum Panel Thickness: 3/8 inch (9.6 mm)

Auxiliary RS485 Communications Port

  • User configurable as MODBUS MASTER or MODBUS RTU SLAVE
  • MASTER ACTIVE (default) drives optional PVA or PVM gages
  • SLAVE ACTIVE offers user adjustable communication parameters

Resistive Input: user selectable as one of the following

  • Backlighting Potentiometer: 1 K Ohm, 1/4 W
  • Murphy Fuel Sender: 33 Ohm full, 240 Ohm empty set standard from factory for use with Murphy fuel sender. Programmable for use with non-Murphy fuel senders.

Shipping Weights (all models): 1 Lb. (450 g.)

Shipping Dimensions (all models): 5 x 6 x 6 in. (127 x 152 x 152 mm)

Clamp: PBT

Connectors: 6-pin Deutsch DT Series

WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.

Literature Drawer: 

PV101-C

PV101-A

PV101-HAZ

Additional product documentation can be found on our product support website or by clicking the Help Center button above.

Part NumberModelDescriptionLanguages Available
78700615PV101-C-MSTD-TlER4Murphy STDEnglish, Spanish, French, Italian, German
78700610PV101-C-M01-TlER4Murphy STD RussianEnglish, Russian
78700611PV101-C-M02-TlER4Murphy STD ChineseEnglish, Chinese
78700612PV101-C-M03-TlER4Murphy STD JapaneseEnglish, Japanese
78700613PV101-C-M04-TlER4Murphy STD Brazilian PortugueseEnglish, Brazilian Portuguese, French, German, Spanish
78700614PV101-C-M05-TlER4Murphy STD CzechEnglish, Czech, French, German, Spanish
78700439PV101-CMurphy STDEnglish, Spanish, French, Italian, German
78700497PV101-C-M01-TlER4Murphy STD RussianEnglish, Russian
78700498PV101-C-M02Murphy STD ChineseEnglish, Chinese
78700499PV101-C-M03Murphy STD JapaneseEnglish, Japanese
78700500PV101-C-M04Murphy STD Brazilian PortugueseEnglish, Brazilian Portuguese, French, German, Spanish
78700501PV101-C-M05Murphy STD CzechEnglish, Czech, French, German, Spanish
78700435PV101-C Configuration Tool KitUser Configuration Tool 
78700244PV101-AMurphy STDEnglish, Spanish, French, Italian, German
78700396PV101-A-M01Murphy STD RussianEnglish, Russian
78700409PV101-A-M02Murphy STD Chinese*English, Chinese
78700411PV101-A-M03Murphy STD Japanese*English, Japanese
78700248PV101-A-HAZMurphy STD, Hazardous EnvironmentEnglish, Spanish, French, Italian, German
78700581PV101-C-HAZMurphy STD, Hazardous EnvironmentEnglish, Spanish, French, Italian, German
78700428PV101 ShieldImpact Shield Assembly
78700430HAZ Environment KitPV101-A-HAZ with PV101 shieldEnglish, Spanish, French, Italian, German
*Added features not available in these language models.