• Murphy by Enovation Controls

PowerCore® MPC‑10

Murphy’s PowerCore MPC-10 is a configurable, all-purpose controller perfect for rental and fleet applications.

This powerful controller is a general controller for mechanical or electronic engine applications needing manual/auto start and manual/auto throttling. It supports J1939 CAN protocols for electronically governed engines as well as I/O for mechanical engines for fault and safety shutdowns. MPC-10 boasts three levels of menu security, perfect for rental fleet protection, which can easily be set with the configuration tool. It is designed for all weather environments and is also available as the ML 1000-4X panel solution. The menu structure is incredibly user-friendly, with the ability to change many parameters and settings from the face without the need of a PC tool, if desired. 

  • CE (European Conformity) mark
  • CSA mark (for Canada and the United States)
  • Tier 4 Final / Euro Stage V Ready
Connectors Specifications Downloads How to Order
Specifications Drawer: 
  • Display: 2.7” WQVGA Monochrome HR-TFT 400x240
  • Keypad: 11 Tactile Feedback Buttons
  • LEDs: (1) Red, Shutdown, (1) Amber, Warning, (1) Green, Auto Mode or Running Loaded State
  • Outputs:
    • (3) Relays: 10A, SPDT, Form C (30 VDC @ 10A max.), 40A max aggregate @ 85C
    • (2) Low-side (1A)
    • (2) High-side (1A)
    • (1) Dedicated Alternator Excite (provides Charge Fail Fault if unable to excite alternator)
  • Inputs:
    • (5) Digital, configurable (high/low)
    • (3) Analog, configurable (4-20mA, 0-5V, resistive)
    • (1) Frequency, supporting Magnetic pickup (30Hz - 10kHz, 2.0VAC-120VAC) and Engine Alternator (30Hz - 10kHz, 4.5 VRMS - 90 VRMS)
  • Communications:
    • (1) CAN J1939
    • (1) RS485, MODBUS RTU
    • (1) USB 2.0B for Programming
  • Total Current Consumption: Power on in stopped state; 117 mA at 12 VDC. Power on in standby mode; 52 mA at 12 VDC.
  • Cranking Power Holdup: 0 VDC up to 50mS (also good for brownout/blackout instances)
  • Dimensions: 167.09mm (L) x 133.29mm (H) x 64.81mm (W)
  • Mass: 1lb. 1oz.
  • Operating Temperature: -40°C to +85°C (-40°F to 185°F)
  • Storage Temperature: -40°C to +85°C (-40°F to 185°F)
  • EMI/RFI: SAE J1113
  • Shock: ± 50G in axes
  • Vibration: Random, 7.86 Grms (5-2000Hz), 3 axes
  • Sealing: IP67 front and back, IP66 Panel Seal with Gasket
  • Case: Polycarbonate/ABS
  • Mating Connector: Deutsch Wedge Lock W12S-P012:
    • Gray DT06-12SA-P012
    • Black DT06-12SB-P012
    • Green DT06-12SC-P012
    • USB 6 pin
  • Shipping Weight: 2lbs. 7.1 oz. (1.11 kg)
  • Shipping Dimensions: 8 x 8 x 5-11/16 in. (204 x 204 x 127 mm)
  • Languages: English, Spanish, German, French, Italian

WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information about California Propsition 65, go to www.P65Warnings.ca.gov or visit our California Proposition 65 page.

Literature Drawer: 

Additional product documentation can be found on our product support website or by clicking the Help Center button above.

Part NumberModel/Description
40700494MPC-10 Controller
40051142Panel Gasket, IP66, MPC-10
40700506PowerCore 3X12 Position Connector Kit
40000598PowerCore 3X12 Position 3’ Conn Whip Harness (1m approx.)
78000668USB Programming Harness
Deutsch 12 pin Connector GrayDeutsch 12 pin Connector BlackDeutsch 12 pin Connector GreenDeutsch 6 pin Connector USB
1Battery (+)1Battery (+)1Battery (-)1USB1_VBUS
2RS485 (+)2Not Used2Battery (+)2USB_DP_OUT
3RS485 (-)3Digital Out 2 +DC
3Battery (+) Switched3USB_DM_OUT
4Relay 3 NC4Digital Out 1 +DC
4Alt Excite +DC (1A)4USB_ID_OUT
5Relay 3 COM5Digital Out 4 -DC
6Relay 3 NO6Digital Out 3 -DC
7Analog In 37Analog In 17Relay 1 NO  
8Digital In 38Analog In 28Relay 1 COM  
9Digital In 49Digital In 19Relay 1 NC  
10Digital In 510Digital In 210Relay 2 NO  
11Not Used11Frequency In11Relay 2 COM  
12Battery (-)12Battery (-)12Relay 2 NC