Posted on: November 5th, 2021 by Rusty Shock

The Cascade controller offers automatic start and stop control with easy configuration for a broad number of applications.

This auto-start controller is designed to fit any engine-driven application requiring a simple and robust automatic start and stop sequence. Pumps, compressors, grinders, power units and generators are just a few of the industrial applications for the controller. The Cascade controller is fully compatible with all major engine types. Whether you are running mechanical or J1939 engines, the controller will work with your application. The Cascade CD101 controller can also be used to replace legacy ASM150, ASM160 and ASM170 controllers.

PowerView® 350

Posted on: November 2nd, 2021 by bobbydank

The PowerView 350 display series monitors multiple engine and machine parameters on an easy-to-read 3.8-inch (97 mm) QVGA monochrome LCD.

The display is capable of handling sophisticated engine diagnostics as well as basic engine alarm/shutdown. The PV350 display is customizable using the PowerVision Configuration Studio® software, an intuitive tool designed to make customization simple. Utilizing the software tool, users can tailor basic graphics, designate screen layout and define custom parameters. The PV350 is equipped with five tactile push buttons to quickly access a convenient menu. In addition, a backlit, heated graphic display and two LEDs indicate active-fault alarm or shut-down status.

PowerView® 780

Posted on: November 2nd, 2021 by bobbydank

Murphy’s PowerView® 780 display offers customization and all-weather durability.

The PowerView 780 display is a full-featured, configurable display that shows integrated engine, transmission and diagnostic information in an easy-to-read operator interface. Equipment functionality can be further integrated through the available I/O and controlled via the CAN bus. The PV780 features a full-color, 7-inch bonded LCD for brighter, smoother graphics and best-in-class sunlight readability. The rugged design makes this display a great solution for extreme environments.

PV780 is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required.

PowerView® 700

Posted on: November 2nd, 2021 by bobbydank

The Murphy PowerView® 700 is the ultimate rugged display for tough environments.

The PowerView 700 is a full-color 7-inch configurable display that integrates vital engine, transmission and diagnostic information into an easy-to-read operator interface. With an IP69K-rated enclosure, glove-friendly capacitive touch screen and an optically-bonded cover glass for superior sunlight visibility, the PV700 thrives in all-weather environments. The button-less modern design keeps the PV700 compact and durable for in-cab or exterior applications with the perfect amount of power to deliver increased productivity, efficiency and control. New for the PV700 is the ability to host four video inputs with the ability to view two video feeds simultaneously.

PV700 is programmable exclusively with PowerVision Configuration Studio® (See How to Order tab for details). Graphic interface not included, custom programming required.


Posted on: October 8th, 2021 by Rusty Shock

Diesel fuel shutoff and fuel line check valves are problem solvers for diesel engine shutdown systems.

76.TS Temperature Switch

Posted on: October 8th, 2021 by Rusty Shock

A compact and economical pressure switch for extended duty applications. The 76.PS is primarily designed for direct engine mounting, to provide electrical signalling of a low oil pressure fault.

The isolated switch contacts are factory set to close below 15 psi (1 bar), but may be adjusted between 14 and 24 psi (1.0 and 1.6 bar). The polyimide diaphragm is compatible with air, engine oil and other hydrocarbon media. (Contact with waterbased fluids is not recommended.)


Posted on: October 8th, 2021 by Rusty Shock

The PSB switch is a direct-mount switch for critical pressure points.

It has one limit contact that can be used to activate an alarm, actuate indicator lights or shutdown equipment. The construction of this instrument is the same as Murphy’s time-proven Swichgage® instrument. A precision machined brass mounting plate and port captures a high-quality, stamped beryllium copper diaphragm. The single-pole, double-throw (SPDT) snap-switch is operated directly from the diaphragm for quick acting and positive switching. Trip point is factory preset according to your specifications. Housing is weather sealed to prevent entry of moisture, dust, etc. A glass-filled nylon terminal block with screw terminal connections gives the PSB switch a real advantage in industrial engine applications. The PSB is ideal when reading is not desired, but pressure is critical to operational efficiency. Intended for use in general purpose non-classified areas.

Specialized Charging and Power Supply Products

Posted on: October 8th, 2021 by Rusty Shock

Specialized battery charging systems and DC standby power supplies made to customers’ specifications.

Enovation Controls has the ability to manufacture to customer’s individual requirements. Shown right are examples of small volume custom designs. Please contact us with your requirements.

Sentinel 150P Series

Posted on: October 8th, 2021 by Rusty Shock

The Sentinel 150P is a range of highly efficient, high performance battery chargers designed for continuous float charge and standby power applications.

Switch Mode technology improves efficiency and low heat dissipation, wide supply voltage tolerance and low output ripple all within a compact and lightweight construction design. The chargers are configured for fast, accurate charging to give optimum battery life and reliability. Each charger’s output can be OEM-configured for optimal charging of different cell types: vented/wet lead acid, Calcium-Calcium, sealed VRLA (AGM or Gel), NiCd or custom requirements. The very smooth output (< 1% ripple) allows charging of sealed or vented batteries or use as a standalone power supply.

TM Series Hourmeters

Posted on: October 8th, 2021 by Rusty Shock

TM Series hourmeters record the operating time of vehicles or powered equipment.

They are electromechanical and have a quartz base time counter that ensures accuracy (better than ±0.02% over the entire range). They can record up to 99,999.9 hours and include an automatic recycle to zero hours feature. The TM Series models have a shock-proof and tamper-proof, totally sealed case made of engineered plastic. These small, lightweight time meters are rugged and durable. They are the answer to applications requiring a low DC power and reliable hourmeter. These hourmeters can be used on any engine where operating time needs to be recorded. All it requires is a DC power source (see specifications).

Search form