SV Series

Posted on: November 9th, 2021 by Rusty Shock

The SV series valve, which is solenoid operated, is a normally closed valve that opens when current is supplied from the battery through a magnetic switch.

Temperature, level or pressure Swichgage® instruments installed on the diesel engine and pump or compressor trip the magnetic switch breaking the circuit from the battery which closes the valve and stops the engine. The SV-12 valve operates on 12-VDC, has a 1/4 NPT inlet and outlet and a full 3/16 in. (5 mm) orifice. A 24-VDC (SV-24) is optional. The SV valves open against 30 psi. (207 kPa) [2.07 bar] inlet pressure. For a greater flow rate valve, we offer the special series SV valve with a 1/4 in. (6 mm) orifice which opens against maximum pressure of 15 psi (103 kPa) [1.03 bar]. This valve is recommended where greater flow is required and only static head or low transfer pump pressures are encountered.

The SV series is NOT intended for use with engines having unit injectors or distributor type injection pumps. Use only with diesel.

WHB Series

Posted on: November 8th, 2021 by Rusty Shock

The WHB Series open type panels are the industry standard for High Plains irrigation engines.

These panels bolt directly to the engine flywheel housing. They include Swichgage protection for low engine oil pressure and high coolant or high oil temperature and have provision to add additional Swichgage instruments, such as a pump discharge pressure, voltage regulator, throttle cable and start button or switch.

Marine Engine Panels

Posted on: November 8th, 2021 by Rusty Shock

Maximize the monitoring and alarm capabilities for your mechanical engine with Murphy’s panel solutions designed specifically for commercial marine applications.

The 100 Series and 300 Series provide the durability, reliability and functionality essential for your engine and offer a broad range of features from which to choose.

  • Designed Specifically for Commercial Marine, Mechanical Engine Applications
  • Full and Broad Compliment of Features and Functionality
  • High-Quality Construction and Components Designed to Withstand the Rigors of Marine Life
  • Local and Remote Panel Options

Murphy Industrial Harnesses

Posted on: November 8th, 2021 by Rusty Shock

Murphy Industrial Harnesses bring universal connection to any engine.

Murphy Industrial Harnesses are built to the specifications of each engine manufacturer and customer. When requesting the MIH Harness, specific information will be obtained so that the correct harness may be built for your engine.

Murphylink® Series Panels (ML25-ML150)

Posted on: November 8th, 2021 by Rusty Shock

MurphyLink® Panels are available in a variety of models featuring varying levels of features and functionality to suit your particular application.

The ML Series panels take advantage of Murphy’s PowerView® technology to integrate and display valuable insight from electronic J1939 engines. Panels equipped with a PV101 display give operators more information than traditional gauges by allowing operators to view multiple engine parameters on a single screen. ML series panels come with a variety of display and throttling capabilities, including gauge cutouts on some models that allow you to add critical gauges specific to your application. For applications with emissions requirements, some ML series panels can be equipped with Tier 4 controls. ML series panels are capable of handling sophisticated engine diagnostics as well as basic engine alarm/shutdown with integrated throttle control.

Keystart

Posted on: November 5th, 2021 by Rusty Shock

Keystart control modules provide manual start/stop and automatic fault protection for generators, pumps and other engine-driven applications.

Outputs allow control of engine fuel (energized to run),  starter motor and preheat. The Keystart also has an alarm output for remote or audible warning of faults. Six LEDs and icons indicate engine status and faults. Four switch inputs (closing to negative on fault) enable automatic shutdown on engine low oil pressure, high coolant temperature and auxiliary faults. Model 9621 has a fully adjustable engine overspeed shut-down feature, configurable for either generator AC or magnetic pickup speed signals. Charge alternator excitation and a charge fail warning LED are standard.

Cascade

Posted on: November 5th, 2021 by Rusty Shock

The Cascade controller offers automatic start and stop control with easy configuration for a broad number of applications.

This auto-start controller is designed to fit any engine-driven application requiring a simple and robust automatic start and stop sequence. Pumps, compressors, grinders, power units and generators are just a few of the industrial applications for the controller. The Cascade controller is fully compatible with all major engine types. Whether you are running mechanical or J1939 engines, the controller will work with your application. The Cascade CD101 controller can also be used to replace legacy ASM150, ASM160 and ASM170 controllers.

PowerView® 350

Posted on: November 2nd, 2021 by bobbydank

The PowerView 350 display series monitors multiple engine and machine parameters on an easy-to-read 3.8-inch (97 mm) QVGA monochrome LCD.

The display is capable of handling sophisticated engine diagnostics as well as basic engine alarm/shutdown. The PV350 display is customizable using the PowerVision Configuration Studio® software, an intuitive tool designed to make customization simple. Utilizing the software tool, users can tailor basic graphics, designate screen layout and define custom parameters. The PV350 is equipped with five tactile push buttons to quickly access a convenient menu. In addition, a backlit, heated graphic display and two LEDs indicate active-fault alarm or shut-down status.

PowerView® 780

Posted on: November 2nd, 2021 by bobbydank

Murphy’s PowerView® 780 display offers customization and all-weather durability.

The PowerView 780 display is a full-featured, configurable display that shows integrated engine, transmission and diagnostic information in an easy-to-read operator interface. Equipment functionality can be further integrated through the available I/O and controlled via the CAN bus. The PV780 features a full-color, 7-inch bonded LCD for brighter, smoother graphics and best-in-class sunlight readability. The rugged design makes this display a great solution for extreme environments.

PV780 is programmable exclusively with PowerVision Configuration Studio®. Graphic interface not included, custom programming required.

PowerView® 700

Posted on: November 2nd, 2021 by bobbydank

The Murphy PowerView® 700 is the ultimate rugged display for tough environments.

The PowerView 700 is a full-color 7-inch configurable display that integrates vital engine, transmission and diagnostic information into an easy-to-read operator interface. With an IP69K-rated enclosure, glove-friendly capacitive touch screen and an optically-bonded cover glass for superior sunlight visibility, the PV700 thrives in all-weather environments. The button-less modern design keeps the PV700 compact and durable for in-cab or exterior applications with the perfect amount of power to deliver increased productivity, efficiency and control. New for the PV700 is the ability to host four video inputs with the ability to view two video feeds simultaneously.

PV700 is programmable exclusively with PowerVision Configuration Studio® (See How to Order tab for details). Graphic interface not included, custom programming required.

Search form