• Murphy

PowerCore® TEC-10

Murphy's PowerCore® TEC-10 panel provides full control with easy setup and installation.

A superior turnkey electronic controller, the PowerCore® TEC-10 panel provides full control of your engine including auto start/stop, auto throttling and display of engine parameters along with critical faults from the engine/application. The TEC-10 supports SAE J1939 CAN protocols for electronically governed engines as well as analog sensors on mechanical engines for fault and safety warnings/shutdowns. 

  • CE (European Conformity) mark
Specifications Downloads
X
Specifications Drawer: 

Interface

  • Display:
    • Monochrome HR-TFT
    • 2.7 in./ 68 mm, WQVGA (400 x 240 pixels)
    • Languages: English, Spanish, German, French, Italian
  • (3) LEDs: green (mode), yellow (warning) and red (shutdown)
  • Operator controls:
    • (11) Raised silicone keypads, tactile feedback
    • (1) Rotary switch, power on/off
    • (1) Push-switch (red), engine stop

Power Supply:

  • Operating Voltage: 8-32 VDC, reverse battery polarity and load dump protected
  • Cranking Power Holdup: 0 VDC up to 50 mS(also good for brownout/blackout instances)
  • Current consumption: Power on in stopped state; 117 mA at 12 VDC. Power on in standby mode; 52 mA at 12 VDC.

Inputs (9):

  • (5) Digital, configurable (active on High, Low, Open)
  • (3) Analog, configurable (4-20 mA, 0-5V, resistive or digital ground)
  • (1) Frequency, supporting: Magnetic pickup (30 Hz - 10 kHz, 2.0 VAC-120 VAC) and Engine Alternator (30 Hz - 10 kHz, 4.5 VRMS - 90 VRMS)

Outputs (8):

  • (2) Relay, switched +DC, 10A
  • (1) Relay, Form C (dry / volt-free), 10A
  • (2) Low-side FET (–DC), 1A
  • (2) High-side FET (+DC), 1A
  • (1) Dedicated Alternator Excitation, +DC, 1A

Communications:

  • (1) CAN: J1939
  • (1) RS485: Modbus RTU

Mating Connectors:

  • 21 Position, Deutsch HDP26-24-21SE,
  • 31 Position, Deutsch HDP26-24-31SE

Physical/Environmental:

  • Enclosure material: Polycarbonate
  • Dimensions (WxHxD): 9.59 x 7.34 x 5.20 in. (243.48 x 186.5 x 132.23mm)
  • Weight: 4 lbs (1.8 kg)
  • IP rating: IP67
  • Operating Temperature: -40° to +85° C (-40° to 185° F)
  • Storage Temperature: -40 to +85° C (-40° to 185° F)
  • Vibration: 7.86 Grms (5-2000 Hz), 3-axis random
  • Shock: ±50G, 3-axis
Literature Drawer: 

This product can be configured using a free copy of PowerVision Configuration Studio® for MPC-20 PC software. To learn more, visit our Software Download page.

Additional product documentation can be found on our product support website or by clicking the Help Center button above.